Logo Oventrop GmbH & Co. KG

HydroControl平衡阀和管道阀门

OV Product Finder
Hydrocontrol V静态平衡阀

For hydronic balancing of distribution pipes in central heating and cooling systems with closed circuits. Determination of the flow rate by measuring the differential pressure with the help of the measuring system OV-DMC 3 taking the preset values into consideration.
Y-pattern valve with secured, at any time controllable, infinitely adjustable fine presetting. All functions accessible from the top. Supplied with two auxiliary valves.

HydroControl M Double regulating and commissioning valves with fixed measuring orifice DN 15 to DN 300

For hydronic balancing of distribution pipes in central heating and cooling systems with closed circuits. The integrated measuring orifice enables easy balancing: modification of the flow rate values via the handwheel can be read off directly with the help of the OV-DMC 3 measuring system, irrespective of the preset values.
Y-pattern valve with fixed measuring orifice and secured, at any time controllable, infinitely adjustable fine presetting. All functions accessible from the top. Supplied with two auxiliary valves.

Hydrocontrol D动态压差平衡阀

For automatic hydronic balancing of distribution pipes in central heating and cooling systems with closed circuits. The differential pressure control ensures hydronic balancing even at partial load and prevents high differential pressures in the controlled system section, e.g. at the radiator valve. When using a HydroControl V as partner valve, the water quantity in the riser can also be measured with the help of the OV-DMC 3 measuring system with the impulse tube connected.

Y-pattern valve with secured, at any time controllable, infinitely adjustable presetting of the desired nominal differential pressure value. All functions accessible from the top.

HydroControl A Shutoff valves DN 15 to DN 150

For shutting off distribution pipes in central heating and cooling systems with closed circuits.
Y-pattern valve without presetting. The HydroControl A is supplied with one HydroPort auxiliary valve which can also be used to connect the impulse tube of a HydroControl D differential pressure regulator under system pressure.

HydroControl静态水力平衡阀用于船舶

用于闭式供热和制冷系统支路的水力平衡。使用OV-DMC3测量压差计算流量调试阀门,需要考虑预设定值。
Y型阀体结构,高可控性,精细的预设值无级可调。所有功能都可从顶部访问。配置两个Classic测压嘴,阀杆密封免维护。
阀体和其他与介质接触的部件材质为防脱锌黄铜、铸铁和青铜。
已取得Det Norske Veritas / German Lloyd的船级社认证。

HydroControl静态水力平衡阀用于太阳能系统

特别适用于闭式太阳能系统的水力平衡。没有关闭功能,以确保最小流量。通过集成的测量孔板测量压差计算流量调试阀门。
Y型阀体结构带测量孔板,高可控性,精细的预设值无级可调。所有功能都可从顶部访问。阀体两侧设置专用于Regusol的连接结构。测压嘴采用插入式结构。
阀体和阀盖材质为青铜,其他与介质接触的部件材质为防脱锌黄铜或者不锈钢。阀杆处设置双层O型圈免维护。
HydroControl STR的特点:最高工作温度200 °C,最小过流能量,固定的测量孔板。

Hydrocontrol-附件